Phone:18913500435 Service hotline:4000222035
Product Products Center

UV Exposure Chamber for PV Modules

Product description: UV Exposure Chamber for PV Modules    Ultraviolet Aging Test ChamberUltraviolet is one of the most important reason of materials aging. Nowadays Most photovoltaic components and materials related are facing serious challenges under high temperature, high humidity, and high stress. Unfortunately some real environmental conditions can’t be simulated for the ordinary testing. We recommend you the UVplus430 chamber, which test under the severe conditions. Meanwhile it’s also applied to the comprehensive stress testing field, such as photovoltaic components like back sheet, glass,EVA and etc.  Characters:High Quality Metal HalideContains UVA, UVB bandSpectral band 280-400nm, UVB takes 3% of the total band, conform to the standard (IEC61646)Good radiation uniformity, better than 15%Radiation power reach about 200 w/m2 ~250 w/m2, greatly shorten the test cycleReliable Power SupplyAdjust radiation from 50% to 100%Radiation control accuracy Greatly improve the service life of the bulbConvenient Operating SystemAdopt touch screen: timing function, record temperature and humidity and alarm Technical parameters:ModelUVplus430SourceAtlas UV1000 Metal   Halide(lifetime:more than1000hours)Spectral Distribution280-400nmUV Exposure Area400mmX300mmIrradiation UniformityBetter   than ±15%Illumination Intensity 200w/m2~250w/m2   4-5 times of the natural UV (max)Radiation Intensity   Adjustment50%~100%Temperature Range30℃-90℃                                                                                           TemperatureAccuracy   ±2℃,Uniformity±3℃,Fluctuation≤±1℃,Heating   Rate≥1℃/minHumidity Range30%-90%RHHumidityTemperature   85℃Humidity   85%R.H(illumination)Temperature   60℃Humidity   85%R.H(illumination)Accuracy±2%   RHUniformity±2%~3%   R.HFluctuation±5%   R.HAccuracy±2%   RHUniformity±2%~3%   R.HFluctuation±5%   R.HTemperature ControlWith   special nickel chromium alloy heater, refrigeration compressor, centrifugal   fan as air circulation fan, make the temperature in the cabinet  more uniform;Humidifying   device, temperature control instrument control running state automaticallyReference StandardIEC61215,IEC61646,IEC61730   for damp heat test              IEC61215,IEC61646   for UV testInside Dimensions815*800*1000mm(W*D*H)Overall Dimensions1100*1500*2050mm(W*D*H)Electrical   Specification380V×3W±10%   Three-phase four-wire+Protective Earthing     50HZ Safety ProtectionOvertemperature   protection, overload protection for compressor and fan,  chamber door locked once running, open   phase protection, power leakage protection, and other functionsNote(1)  when the   effective radiation area is 300 mm * 300 mm, the irradiation intensity can   reach more than 250W/m²; when irradiation intensity is 150W/m², irradiation   area is larger than 400 mm * 300 mm(2)  irradiation   area can be customized(3)  UV   irradiation intensity monitoring and accumulated (optional)(4)  UV   ultraviolet protective suit (optional)
product description:

Ultraviolet is one of the most important reason of materials aging. Nowadays Most photovoltaic components and materials related are facing serious challenges under high temperature, high humidity, and high stress. Unfortunately some real environmental conditions can’t be simulated for the ordinary testing. We recommend you the UVplus430 chamber, which test under the severe conditions. Meanwhile it’s also applied to the comprehensive stress testing field, such as photovoltaic components like back sheet, glass,EVA and etc. 

 
 
颜色:
 

UV Exposure Chamber for PV Modules    

Ultraviolet Aging Test Chamber

Ultraviolet is one of the most important reason of materials aging. Nowadays Most photovoltaic components and materials related are facing serious challenges under high temperature, high humidity, and high stress. Unfortunately some real environmental conditions can’t be simulated for the ordinary testing. We recommend you the UVplus430 chamber, which test under the severe conditions. Meanwhile it’s also applied to the comprehensive stress testing field, such as photovoltaic components like back sheet, glass,EVA and etc. 

 

Characters:

High Quality Metal Halide

Contains UVA, UVB band

Spectral band 280-400nm, UVB takes 3% of the total band, conform to the standard (IEC61646)

Good radiation uniformity, better than 15%

Radiation power reach about 200 w/m2 ~250 w/m2, greatly shorten the test cycle

Reliable Power Supply

Adjust radiation from 50% to 100%

Radiation control accuracy < + / - 1%

Greatly improve the service life of the bulb

Convenient Operating System

Adopt touch screen: timing function, record temperature and humidity and alarm

 

Technical parameters:

Model

UVplus430

Source

Atlas UV1000 Metal   Halide(lifetime:more than1000hours

Spectral Distribution

280-400nm

UV Exposure Area

400mmX300mm

Irradiation Uniformity

Better   than ±15%

Illumination Intensity

 200w/m2~250w/m2   4-5 times of the natural UV (max)

Radiation Intensity   Adjustment

50%~100%

Temperature Range

30℃-90℃                                                                                           

Temperature

Accuracy   ±2℃,Uniformity±3℃,Fluctuation≤±1℃,Heating   Rate≥1℃/min

Humidity Range

30%-90%RH

Humidity

Temperature   85℃

Humidity   85%R.H(illumination)

Temperature   60℃

Humidity   85%R.H

(illumination)

Accuracy±2%   RH

Uniformity±2%~3%   R.H

Fluctuation±5%   R.H

Accuracy±2%   RH

Uniformity±2%~3%   R.H

Fluctuation±5%   R.H

Temperature Control

With   special nickel chromium alloy heater, refrigeration compressor, centrifugal   fan as air circulation fan, make the temperature in the cabinet  more uniform;

Humidifying   device, temperature control instrument control running state automatically

Reference Standard

IEC61215,IEC61646,IEC61730   for damp heat test              

IEC61215,IEC61646   for UV test

Inside Dimensions

815*800*1000mm(W*D*H)

Overall Dimensions

1100*1500*2050mm(W*D*H)

Electrical   Specification

380V×3W±10%   Three-phase four-wire+Protective Earthing     50HZ 

Safety Protection

Overtemperature   protection, overload protection for compressor and fan,  chamber door locked once running, open   phase protection, power leakage protection, and other functions

Note

(1)  when the   effective radiation area is 300 mm * 300 mm, the irradiation intensity can   reach more than 250W/m²; when irradiation intensity is 150W/m², irradiation   area is larger than 400 mm * 300 mm

(2)  irradiation   area can be customized

(3)  UV   irradiation intensity monitoring and accumulated (optional)

(4)  UV   ultraviolet protective suit (optional)



Ultraviolet is one of the most important reason of materials aging. Nowadays Most photovoltaic components and materials related are facing serious challenges under high temperature, high humidity, and high stress. Unfortunately some real environmental conditions can’t be simulated for the ordinary testing. We recommend you the UVplus430 chamber, which test under the severe conditions. Meanwhile it’s also applied to the comprehensive stress testing field, such as photovoltaic components like back sheet, glass,EVA and etc. 

Hot Products / Hot Products More
ABOUT US
NOVTEC means technology and innovation.
We are a innovative and technology company
importing and developing testing instruments
GET IN TOUCH
ADDRESS:
Building C21,First Industry,No.2588Wuzhong
Avenue,Wuzhong District,Suzhou City,Jiangsu Province
PHONE:
TEL: ( 86) 189-1350-0435
Sales Line:  400-022-2035
FOLLOW US
Copyright ©2003 - 2018 苏州诺威特测控科技有限公司
犀牛云提供企业云服务
  • Top
  • Wechat code
    关注微信